Spectrum-controls 1769sc-IR6I Manual de usuario descargar pdf (Pagina 65)

User’s Manual Pub. 0300241-01 Rev. A

Appendix D

Configuring the IR6I to be

Used with a 1769-ADN

DeviceNet Adapter

This application example assumes your 1769sc-IR6I isolated RTD/resistance input

module is in a remote DeviceNet system controlled by a 1769-ADN DeviceNet adapter.

RSNetworx for DeviceNet is not only used to configure your DeviceNet network, but is

also used to configure individual I/O modules in remote DeviceNet adapter systems.

For additional information on configuring your DeviceNet scanners and adapters, please

refer to the documentation for these products, including the Compact™ I/O 1769-ADN

DeviceNet Adapter user’s manual, publication 1769-UM001A-US-P. The adapter

manual also contains examples on how to modify I/O module configuration with Explicit

Messages while the system is running. Whether you are configuring an I/O module

offline and downloading to the adapter or you accomplish the configuration online, the

1769sc-IR6I isolated RTD/resistance module must be configured prior to configuring the

DeviceNet adapter in the DeviceNet scanner’s scanlist. The only ways to configure or re-

configure I/O modules after the adapter is placed in the scanners scanlist are via Explicit

Messages or by removing the adapter from the scanner’s scanlist, modifying the

configuration of the I/O module, then adding the adapter back into the scanner’s scanlist.

This example takes you through configuring your 1769sc-IR6I isolated RTD/resistance

input module with RSNetworx for DeviceNet, version 6.00 or later, prior to adding your

adapter to the scanlist of your DeviceNet scanner.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 73 74

Sin comentarios

Spectrum-controls 1769sc-IR6I Manual de usuario Pagina 65